High Performance Sealing Solutions

tel: +44 (0) 1384 413 058

WR11

The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder,...

WR12

The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter. The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder,...

WR13

The profile is designed with two geometrically different lips for wiping off any dirt on the rod and to reduce the residual oil film on the media side. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod....

WR13-E2

The profile is designed with two geometrically different lips for wiping off any dirt on the rod and to reduce the residual oil film on the medium side. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod....
WR14

WR14

The profile is designed with one sharp lip for wiping off any dirt on the rod. The residual oil film is recovered. The wiper consists of a PTFE wiping part and an O-Ring as preload element, maintaining contact pressure on the rod. Due to the use of an O-Ring the wiper...
WR01

WR01

The profile is designed with interference on the OD which provides a good static fit in the groove, preventing the entry of humidity and other contamination via the outside diameter. The design of the wiper lip supports the recirculation of the remaining oil film into...