Looking for seals that handle high temperatures, oils and aggressive chemicals? See our Viton seals and FKM O-rings for oil and gas, chemical and engineering applications.
Select Product Type …RS17D
Symmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Special design for small cross sections where lips would be too thin. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Excellent static and dynamic sealing performance. Excellent performance over all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure. Particularly suitable for high viscosity media.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.3 m/s
0.3 m/s
0.3 m/s
0.3 m/s
0.3 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
RS17E
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Special design for small cross sections where lips would be too thin. Secondary lip for stabilising at large seal heights and reducing the residual oil film. Activated back-up ring prevents and reduces POM P101-WEextrusion. Excellent static and dynamic sealing performance. Excellent performance over all pressure ranges. Used for short pulsating strokes. No reverse leakage when changing direction. Recommended for positioning or holding under pressure. Particularly suitable for high viscosity media.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.3 m/s
0.3 m/s
0.3 m/s
0.3 m/s
0.3 m/s
700 bar/10.000 psi
700 bar/10.000 psi
300 bar/4300 psi
300 bar/4300 psi
300 bar/4300 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE
POM P101-WE
PEEK PK100-CN
PEEK PK100-CN
RS19
Asymmetrical, single acting rod seal, designed with low interference on the static sealing diameter. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions. Negligible tendency to “stick-slip” effect, small break away loads.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
15 m/s
15 m/s
15 m/s
15 m/s
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
160 bar/2300 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
RS19A
Asymmetrical, single acting rotary seal with clamping flange. Preload effected through V-spring. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for short and long stroke lengths. Low friction in dry running or poor lubrication conditions, no stick-slip effect.
-200°C to +80°C
-200°C to +260°C
-200°C to +260°C
-200°C to +260°C
2 m/s
2 m/s
2 m/s
2 m/s
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
150 bar/2200 psi
UHMWPE
PTFE T101-W
PTFE-40% Bronze T120-BR40
PTFE-25% Carbon T125-C25
RS20
Asymmetrical, double acting compact rod seal, designed with interference on the OD which provides a good static fit in the groove. Excellent static and dynamic sealing performance. Excellent performance in high and low pressure conditions. Negligible tendency to “stick-slip” effect. High break-away load after long standstills. Activated back-up rings reduce extrusion and prevent twisting of the seal in the groove.
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
0.5 m/s
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
700 bar/10.000 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
POM P101-WE NBR 70
POM P101-WE NBR 70
POM P101-WE NBR 70
PEEK PK100-CN FPM 75
PEEK PK100-CN FPM 75
RS31-33
Asymmetrical, single acting rod seal, combined with pressure ring and support ring. By adjusting the number of packings friction and leakage characteristics can be influenced. Excellent dynamic and good static sealing performance. Excellent performance in high pressure conditions. Especially used for long stroke lengths. Low friction due to flexible lip design.
-30°C to +105°C
-30°C to +105°C
0.5 m/s
0.5 m/s
500 bar/7200 psi
500 bar/7200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
POM P101-WE NBR 70
POM P101-WE NBR 70
RS35
Asymmetrical, double acting compact rod seal, designed with interference on the OD which provides a good static fit in the groove. Excellent static and dynamic sealing performance. Excellent performance in low pressure conditions. For rotary applications the interference on the OD has to be increased (better static fit to reduce the danger of the seal rotating in the housing), the preload has to be reduced (lower friction).
-30°C to +105°C
-30°C to +105°C
-25°C to +100°C
-25°C to +150°C
-20°C to +210°C
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
0.4 m/s
400 bar/5800 psi
400 bar/5800 psi
150 bar /2200 psi
150 bar /2200 psi
150 bar /2200 psi
PU Red U203-95
PU 57 MoS2 Grey U203-GM95
NBR 85 N107-85
HNBR 85 HN112-B85
FPM 85 F109-BR85
- 1
- 2








