High Performance Sealing Solutions

tel: +44 (0) 1384 413 058
Sealco International

Standard O Rings

O-Rings are one of the most common seals used in seal design because they are relatively inexpensive and reliable. O Rings seals are available in various metric and standard sizes.

UK standards sizes are known as BS Sizes (BS1806 for Imperial) and (BS4518 for Metric).

In general o-rings are specified by internal diameter and the cross section.

O Rings made to British Standard Imperial (BS) and British Metric (RM) sizes as well as Swedish, German, French and Japanese (JIS) metric sizes in Nitrile, Viton, Silicone, Flurosilicone, Ethylene Propylene (E.P.D.M.), Neoprene, NWC (National Water Council approved),FEP (Viton and Silicone encapsulated), High Nitrile and Food Grade materials in a variety of shore hardness’s, as well as in P.T.F.E. to suit both static and dynamic applications.

WE STOCK THE FULL BS1806 IMPERIAL SIZE RANGE IN THE FOLLOWING COMPOUNDS

  • Viton ¨ 75 (Genuine Dupont)
  • Viton ¨ 90 (Genuine Dupont)
  • Silicone / Red FDA Approved
  • Nitrile (NBR) 70

FEP ENCAPSULATED

An encapsulated O Ring comprises an elastomer core which has been seamlessly encapsulated in a jacket of Teflon¨ fluroropolymer. The core is either Viton¨ (FKM) or Silicone (VMQ) and the jacket FEP or PFA. Encapsulated ‘O’ rings are recommended when a standard ‘O’ ring has inadequate chemical resistance for an application and a solid PTFE ‘O’ ring does not have the elasticity for reliable, long-term fluid sealing. They are often used in the chemical, petrochemical, food and pharmaceutical industries, where chemical resistance and/or hygiene are required.

FEP-ENCAPSULATED ‘O’ RINGS GIVE:

  • Excellent resistance to a wide range of chemicals
  • Low friction
  • Low ‘stick-slip’ effect.

TYPICAL TEMPERATURE RANGES OF:

-60¡C to +200¡C with Silicone core

-20¡C to +200¡C with Viton¨ core.

If you would rather contact us directly rather than email: Please call: +44 (0) 1384 413 058