Asymmetrical, single acting rod seal, designed with interference of the preload element on the OD and slight interference of the glide ring on the ID. High pressure force because of a machined rubber preload element. Less relative movement of the rubber part compared...
Asymmetrical, single acting rod seal. Long sealing lip compensates for radial inaccuracy or eccentricity. Useable for long stroke lengths. Low break-away load after long standstills. Seal design tends to “stick-slip” effect.
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic sealing performance. Useable for long stroke...
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Secondary lip for stabilising at large seal heights and reducing the residual...
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Wider groove and softer lips compared to RS01. Dynamic sealing lip shorter than static lip to avoid drag pressure. Excellent static and dynamic...
Asymmetrical, single acting rod seal, designed with interference on the OD which provides a good static fit in the groove. Dynamic sealing lip shorter than static lip to avoid drag pressure. Secondary lip for stabilising at large seal heights and reducing the residual...
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OKPrivacy Policy
